12
EN
Radio
Selecting Tuner Band
1. Press
SOURCE
on the main unit or
TUNER
on
the remote control to enter Tuner mode.
2. Press
BAND / AUTO PROG
on the main unit or
TUNER
on the remote control to select
between FM or AM Radio band.
Tuning to a Station
Press
DIGITAL TUNING
or to select
frequencies.
Using Presets
The tuner can be in either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
• Press
TUNE•PRESET
to toggle TUNE and
PRESET mode.
• Press
DIGITAL TUNING
or on the
main system or
FOLDER/PRESET
or to
access the previous or next preset station.
The display first shows the preset program
number and after a few seconds, the frequency
will be displayed.
(FMPR:01 is FM preset 1)
Auto Preset Programming
(FM only)
Press and hold the
BAND / AUTO PROG
button
for 2 seconds to scan stations in FM band. The
stations will then be stored as preset channels. A
maximum of 32 stations can be stored. Beware of
your preset channels being erased accidentally
because the scanning and storing process is
automatic upon pressing the button. You can
stop the automatic scan by pressing any button,
but the erased stations cannot be recovered.
Manually Setting Presets
1. Press the
TUNE•PRESET
button to enter TUNE
mode.
2. Press
DIGITAL TUNING
or to
access
the desired frequency.
3. Press the
PROG•SET
button once.
4. The most recently accessed program location
will be displayed.
5. If a different program location is preferred,
press
DIGITAL TUNING
or
on the
main unit or
FOLDER/PRESET
or to
move to the desired preset number (1-32).
6. Press
PROG•SET
to store the selected
frequency at that preset.
Suppressing Stereo Signal
Press
FM ST
to toggle between FM mono and
stereo mode. (Remote Only) “ST” is displayed in
stereo mode.
Tips:
Your audio system has 32 preset stations.
RS2652 EN 5/17/05 9:49 AM Page 18
