9
EN
Radio
1. Press
SOURCE
to select
TUNER
.
2. Press
BAND
to select between AM or FM radio
band.
Tuning to a Station
Press
SKIP FORWARD / BACKWARD
to select frequencies.
Using Presets
The tuner can be in either
TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
Press
SKIP BACKWARD
or
SKIP FOR-
WARD
on the main system or
PRESET UP
or
DOWN
on the remote control to access the previous
or next preset station. The display first shows the pre-
set program number and after a few seconds, the fre-
quency and preset program number will be displayed.
(FMPR:01 is FM preset 1)
Auto Preset
Programming
(for FM only)
Press and hold
BAND
button for 2 seconds to scan stations in FM band. The
stations will then be stored as preset channels. A maxi-
mum 32 stations can be stored. Beware of your preset
channels being erased accidentally because the scan-
ning and storing process is automatic upon pressing
the button. You can stop the automatic scan by press-
ing any button, but the erased stations cannot be
recovered.
Setting Presets
1. Press
TUNE/PRESET
button to enter
TUNER
mode.
2. Press
SKIP FORWARD / BACKWARD
to access the desired frequency.
3. Press the
PROG/SET
button once.
4. The most recently accessed program location will
be displayed.
5. If a different program location is preferred, press
SKIP BACKWARD / FORWARD
to
move to the desired preset number (1-32).
6. Press
PROG/SET
to store the selected frequency at
that preset.
Suppressing Stereo Signal
Press
FM ST
to toggle between FM mono and stereo
for stereo FM stations. (Remote Only)
PR:01
87.50 MH
z
CD-R / RW COMPATIBLE
DIGITAL TUNING
PRESET EQ
REPEAT
PROG•SET
SOURCE
CLOCK
TUNER PRESET
TIMER
BAND
DIMMER
DISC
SKIP
O
PE
N*CLOS
E
STANDBY
IR SENSOR
DEMO
RS 2622
AUTO PROG
B. BOOST
X-SURR.
Tip: Your audio system has 32 preset stations.
RS2622 EN 12/11/02 5:28 PM Page 12
