5
EN
Display
Showing the Demonstration
Not operational in CD mode. Press
DEMO/DIMMER
to turn on/off demonstration mode. The demonstra-
tion scrolls through all display operations.
DISPLAY ALARM/CLOCK
Setting the Time
1. Press
CLOCK
until the time flashes on the display.
2. Press
SKIP BACKWARD
or
SKIP FORWARD
to set
the hour and then press
CLOCK
to shift to minute
digits
.
3. Press
SKIP BACKWARD
or
SKIP FORWARD
to set
the minute.
4. Press
SET
to save settings and
STOP
to quit set-
ting.
Note: When system is ON, you can press
CLOCK
to
display the current time for about 2 seconds.
Setting the Timer
1. Press and hold
TIMER
until the
ON
and clock time
flash on the display (
ON
- timer on time )
2. For setting time, press
SKIP FORWARD / BACK-
WARD
to set the hour and then press
TIMER
to shift
to minute digits
.
3. Press
SKIP FORWARD / BACKWARD
to set the
minute.
4. Press
TIMER
to change to
OF
(timer off time) with
clock time
flashing
. Repeat steps 2 & 3 for timer off
time setting.
5. Press
TIMER
to select source. Press S
KIP FOR-
WARD / BACKWARD
to select between CD /TUNER /
AUX / TAPE)
6. Press
TIMER
to set volume. Rotate the VOLUME
knob to set desired volume level.
7. Press
SET
to save settings
or
STOP
to quit setting.
Activating the Timer
Press and release
TIMER
to turn on/off
the alarm. The alarm is active when the
clock icon indicator is lit.
Adjusting the Display Brightness
1. Press and hold
DEMO/DIMMER
for more than 2
seconds.
2. While the dimmer is dis-
played,
press and release
DIMMER
to select the desired
level (
DIMM 0 - 3
).
Sleep Mode
You can select the time interval in
minutes
before
the unit turn off automatically. Press
SLEEP
on the
remote to select among 5,15, 30, 45, 60, 90 & 120
minutes.
(Remote Only)
DIM 2
RS2531-EN 3/6/01 2:51 PM Page 9
