9
EN
Radio
Selecting Tuner Band
1. Press
SOURCE
on the main unit or
TUNER
on the
remote control to enter Tuner mode.
2. Press
CD INFO/BAND
to select between AM or
FM Radio band.
Tip
: Your audio system has 32 preset stations.
Tuning to a Station
Press
SKIP BACKWARD / SKIP FORWARD
on the main unit or
TUNING
or on the
remote control to select frequency.
Using Presets
The tuner can be in either TUNE or PRESET mode.
When in preset mode,
• Press
TUNE/PRESET
on the main system or
PRESET
or
on the remote control to
access the previous or next preset station.
• The display first shows the preset program
number and after a few seconds, the preset
program and frequency will be displayed.
Auto Preset Programming
Press and hold
CD INFO/BAND
button for 2 seconds
to scan stations in FM and AM band. The stations will
then be stored as preset channels. A maximum of 32
stations can be stored. Beware of your preset chan-
nels being erased accidentally because the scanning
and storing process is automatic upon pressing the
button. You can stop the automatic scan by pressing
any button, but the erased stations cannot be recov-
ered.
Manually Setting Presets
1. Press
SKIP BACKWARD / SKIP
FORWARD
to access the desired
frequency.
2. Press
the
PROG/SET
button once.
3. The most recently accessed program location will
flash on the display.
4. If a different program location is preferred, press
SKIP BACKWARD
or
SKIP FORWARD
on the main unit or
PRESET
or on the
remote control to move to the desired preset
number (1-32).
5. Press
PROG/SET
to store the selected frequency
at that preset.
Suppressing Stereo Signal
Press
ST/MONO
on the main unit or
FM ST.
on the
remote control to toggle between FM mono and
stereo for stereo FM stations.
PR 01 FM
07
87.90
PROG
MHz
RS2302 EN 4/2/03 3:41 PM Page 13
