CD and mp3 Disc Playback
Important CD and mp3/WMA
Information
This unit is compatible with
CD-RW/ CD-R discs for
playback.
CD-R / RW
Notes on CD-R/RW Disc:
• Do not affix any type of labels to either
side (recordable or labeled side) of a
CD-R/RW disc as this may result in the
unit malfunctioning.
• To avoid damages to the CD-R/RW disc, do
not open the disc compartment door while
the disc is being read.
• Do not load an unrecorded CD-R/RW disc
into the unit. This may take a longer time
to read the disc.
• Playback capability for CD-RW discs
may vary due to variations in the
quality of the CD-RW disc and the
recorder used to create the disc.
Notes on mp3/WMA Disc:
• Use .mp3 as the extension when converting
audio files into mp3 for saving onto
CD-R(W) or CD-ROM, e.g. Abc08.mp3.
Do not use any other extension e.g. .doc,
.pdf.
• Do not use the .mp3 extension for other
text or non-audio data files as this may
result in serious malfunction and harmful
noise interference.
• For better quality in mp3/WMA disc
playback, the CD quality should be
recorded 128kbps or above.
• Disc data size > 650MB is not
recommended.
• Total files and folders in the disc should
not exceed 250, it also depends on the
length of the file/folder names.
• For mixed mode discs, only one mode will
be selected for playback depending on the
recording format.
• To ensure good performance, wait until
the disc changer completely reads the disc
before proceeding.
• mp3 files in CD ROM EXTRA format disc
cannot be recognized.
Settings
Sleep Mode
You can select the time interval in minutes before
the unit turns off automatically.
Press
SLEEP
to select among OFF, 120, 90, 60, 45,
30, 15 and 5 minutes.
The SLEEP icon lights on the display when sleep
mode is activated.
View Remaining Sleep Time
When sleep is activated, press
SLEEP
once to
view remaining sleep time.
Adjust Sleep Time
Press
SLEEP
again when the remaining sleep time
is displayed to change sleep time.
Note:
Sleep is automatically de-activated when
the unit is turned off.
Sound Features
Volume Control
Rotate the volume control on the main unit or
press
VOL
or on the remote control to
adjust volume level. The volume level shows
briefly on the display.
Bass Boost
Press
B.BOOST
to turn on/off boosting the bass
frequency. The B.Boost icon lights on the display
when it is activated.
Muting Audio
Press on the remote to cut the sound
(Remote Only). MUTE flashes on the display.
Using Preset Equalizer Curves
Press
EQ
to toggle among FLAT, JAZZ, CLASSIC,
ROCK, and CUSTOM. The display shows your
selection briefly and the relative icon lights on
the display.
Creating a Custom Curve
1. Press
EQ
to select CUSTOM mode.
2. While CUSTOM is displayed, press
or
to
cycle among displayed bass and treble
range levels.
3. While BAS and TRE is displayed, adjust volume
control to set the associated gain between
-10 - +10.
4. Press
EQ
to exit.
or
EQ
BAS +08
EQ
TRE +02
EN
EN
10
9
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 16
