EN
9
Tape Player
Playing a Tape
1. Press
SOURCE
on the main unit repeatedly or
TAPE
on the remote to enter Tape mode.
2. Press on the
PUSH OPEN• CLOSE
area of the
cassette door to open it.
3. Insert a tape into the door and push the door
closed.
4. Press
SKIP BACKWARD or SKIP
FORWARD on the main unit to rewind and fast
forward tape to position the tape to the
desired starting position.
5. Press PLAY/PAUSE to begin playback.
Press again to pause playback.
6. Press and hold
DISC SKIP/DIR/REV
. to select tape
playback direction.
Auto Reverse
You can select auto reverse tape playback or
continuous playback .
Press
DISC SKIP/DIR/REV.
repeatedly to toggle
normal playback, auto reverse, and continous
playback.
Recording
From Tuner
1. Insert a tape into deck.
2. Press
SOURCE
repeatedly on the main unit or
TUNER
on the remote control to select
Tuner
3. Press
BAND
to access the desired radio band.
4.. Press SKIP FORWARD or SKIP
BACKWARD on the main unit or
TUNING
or on the remote control to tune to the
station to be recorded.
5. Press
REC•II
to enter Record standby. Press
again to begin recording.
6. press
STOP
to end recording.
From CD
1. Insert a tape into deck .
2. Press
SOURCE
repeatedly on the main unit to
select CD then press
DISC SKIP
to select the disc
to be recorded.
or
Press
DISC1 / DISC2 / DISC3
on the remote to
select the disc to be recorded directly
3. Press SKIP FORWARD or SKIP
BACKWARD on the main unit or
TUNING
or
on the remote control to select the track to
be recorded.
or
Press
PROG/SET
to enter program mode.
4. Press
REC•II
to enter Record standby. Press
again to begin recording.
5. press
STOP
to end recording.
From AUX
1. Insert a tape into tape deck.
2. Check that the auxiliary device has been
connected correctly to the AUX connector on the
back of the system.
3. Start playback on the auxiliary device.
4. Press
REC•II
to enter Record standby. Press
again to begin recording.
5. Press
STOP
to end recording.
DIGITAL LOGIC DECK
PHONES
AUTO REVERSE
RS2010 EN rev.1 9/2/02 9:40 AM Page 13
