EN
17
Alarm Settings
Nap Mode
For catnaps up to 2 hours without
disturbing the regular alarm settings, the
NAP function wakes you up after a short
period of time. Simply:
1. Press
NAP
, the
NAP
indicator will flash.
While the
NAP
indicator is flashing,
press
REV
or
FWD
to adjust nap time.
The time range is from 10 minutes to 2
hours at 10 minutes interval (default is
20 minutes).
2. Wait 3 seconds or press
NAP
again to
confirm, the
NAP
indicator will show
on the display.
3. Press
NAP
once to show time left, after
3 seconds, the display will return to
clock time.
Stopping the Nap Alarm
When the NAP alarm sounds, you can
press
OFF
to stop it.
Cancelling the Nap Alarm
Press and hold
NAP
for 5 seconds to
cancel the nap setting.
Snooze
This operation allows extra sleep time
after the alarm is on. The alarm will be
off by pressing
SNOOZE
until the snooze
period is over. Snooze function can be
used repeatedly up to 2 hours. After this,
the alarm will turn off until the next
alarm conditions are met. Set the
“quiet” period as follow:
1. While pressing
SNOOZE
, press
REV
or
FWD
to set the “quiet” period (the
default time is 9 minutes) from 1 minute
to 30 minutes. Release
SNOOZE
, then
the “quiet” period is set.
Auto Brightness
Slide the
AUTO BRIGHTNESS
switch
AUTO BRIGHTNESS
ON
OFF
at the back of the unit to the
ON
position. The brightness of the LCD
display will vary automatically according
to the environment.
Slide to the
OFF
position, the display will
remain at its brightest level.
Backlight Color Select
You can choose among 4 different
backlight color - green, blue, amber and
white.
1. Before a specific color is set, the back-
light color will keep changing.
2. Press
Color Select
Color Select
at the back
of the unit to toggle among different
backlight color.
3. If the AC power and backup batteries
are removed, the 4 backlight colors will
starting changing again once the AC
power is resumed.
Tip:
Tip:
Tip:
Tip:
Tip:
Only alarm tone can be se-
lected in NAP mode.
