Using the remote control
Battery Installation
1. Open the battery compartment door.
2. Insert 2 AA-size batteries as indicated on the
back of the remote control.
3. Close the battery compartment door.
In Your Sights
The remote control works by line-of-sight, which means
that for best results, you should aim the remote directly
at the front of the Center Speaker.
General Controls
POWER – When the system is in Standby mode, press
the POWER button to switch unit ON or back to
Standby.
MUTE – Press to mute on or off the sound.
TV – Select the TV input.
CD – Select the CD input.
AUX – Select the AUX input.
NORMAL CENTER – Select the Dolby Pro Logic
Normal Center mode.
PHANTOM CENTER – Select the Dolby Pro Logic
Phantom Center mode.
BYPASS – Press to select Bypass (2CH) mode.
TEST TONE – Press to begin the TEST TONE function
while in
Pro Logic mode. Press any key to stop the
TEST TONE function.
SU/- – To adjust the Surround level.
B/- – To adjust the balance level.
BALANCE RESET – To reset the balance level.
/- – To adjust the Center level.
BASS +/- – To adjust the Bass level.
/- – To adjust the Treble level.
LEVEL RESET – To reset the audio level.
VOL +/- – To adjust the master volume level.
9
BYPASS
TEST
TONE
NORMAL
POWER
MUTE
TV
CD
AUX
PHANTOM
TREBLE
SURROUND
BASS
BALANCE
VOL
AUDIO
RESET
BALANCE
RESET
CENTER
RP 9990
RP9990-2
10/10/00, 11:55 AM
4
