14
Troubleshooting Guide Continued
Problem
Cause
Solution
Sound skips
Disc is damaged
Insert a new disc
Excessive external vibration
Turn on ESP (p. 6) or find a more stable position
Disc is in place, player is in play mode,
Requires headphones
Put on headphones (p. 3) or connect to car stereo (p. 9)
but still no sound
or external amplifier
Adjust volume
Poor connections
Check connections (p. 2-3, 8-9)
PAUSE is active
Press PLAY/PAUSE button to put in play mode
Unit will not scan the disc. Play is erratic.
Batteries are weak
Replace batteries or try AC or Car DC power
Dirty or damaged disc
Replace or clean the disc
Appendix C: Headphone Safety
For your comfort, health and safety, be sure to observe the following guidelines when using headphones:
Hearing Comfort and Well Being
• Always turn volume down to the minimum setting before plugging in the headphones.
• Don’t listen at a high volume.
• Hearing experts advise against extended continuous listening through a headset.
• If you experience a ringing in your ears, reduce volume or discontinue use.
Safety
• Don’t use headphones while operating a motorized vehicle. This can create a traffic hazard and is illegal in many areas.
• Do not use headphones in potentially hazardous situations.
• Even if your headset is an open-air type designed to let you hear outside sounds, don’t turn up the volume so high that you can’t hear
what’s around you.