background image

ENGLISHENGLISH

1

FCC

Federal Communications 

Commission Statement

This equipment has been tested and found to comply with the limits of a class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no guarantee that 

interference will not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or more of the following 

measures:

1.   Reorient/Relocate the receiving antenna.

2.   Increase the separation between the equipment and receiver.

3.   Connect the equipment into an outlet on a circuit which is different from what the receiver 

is connected to.

4.   Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the manufacturer 
responsible for compliance could void the user authority to operate the 
equipment.

Содержание RLC4283A








































Отзывы: