15
Programming With Code Search
Identifying Codes From Your Universal Remote
1. Manually turn on the device you wish to program.
2. Press and hold
CODE SEARCH
until the
INDICATOR
LIGHT
lights, then release
CODE SEARCH.
3. Press and release the device button for the device you are
programming. The
INDICATOR LIGHT
will blink once,
then remain lit.
4. Press and release
POWER
until your device turns off.
Important:
You may have to press
POWER
up to 200 times.
5. When your device turns off, press
ENTER
, the
INDICATOR LIGHT
will turn off.
1. Press and hold
CODE SEARCH
until the
INDICATOR
LIGHT
lights, then release
CODE SEARCH.
2. Press and release the device button for the code you are
retrieving. The Indicator Light will blink once.
3. Press and release
CODE SEARCH
. The
INDICATOR
LIGHT
will turn off.
4. Starting with
0
on the keypad, press the number
buttons in order (
0-9
) until the
INDICATOR LIGHT
blinks.
5. The number which causes the indicator light to blink is
the first digit of your code.
6. Repeat step 4 until you have retrieved all three
numbers in the code.
If your TV, VCR, DBS Satellite System, DVD, Cable Box or Audio System does not respond
after you have tried all the codes for your brand, or if your brand is not listed, try searching
for your code by following the steps below.
If you need to find the three-digit code for your TV, VCR, DBS Satellite System, DVD, Cable
Box or Audio System after your device is set-up use this procedure.
(OFF)
INDICATOR
LIGHT
power
enter
…
(OFF)
INDICATOR
LIGHT
0
9
code
search
code
search
code
search
(BLINK)
power
code
search
CABLE
DVD
TV
VCR
DBS
SAT
(BLINK)
power
code
search
CABLE
DVD
TV
VCR
DBS
SAT
RCU510manual 7/19/01 10:27 AM Page 16