RCA RCU410MSL Скачать руководство пользователя страница 7

Страница: 7 / 12

Learning Function

1. Place the RCA remote control

unit and the Original remote
control unit so that they face
each other. They should not be
any more than 2 inches apart.

2. Press and hold the

CODE

SEARCH

button until the

INDI-

CATOR LIGHT

lights, then release

the

CODE SEARCH

button.

3. Press and release the desired

Mode button (

VCR

CABLE

SAT

, etc…). The

INDICATOR

LIGHT

will blink off once button

press is accepted.

4. Press and release the

LEARN

button.

5. Press and release the valid button

to be learned on the RCA remote
in which you will store a new
function. The

other functions keys may be used
in this programming mode.

6. Press and hold the button on

the original remote control until

INDICATOR LIGHT

on the RCA

remote blinks once. Once the

INDICATOR LIGHT

blinks you

may continue with the next
function.

If there is error in learning the new
function the

INDICATOR LIGHT

will flash for 3 seconds but remain
in the learning mode. Return to step
5 if the

INDICATOR LIGHT

flashed.

NOTE: Hold the function key on your original

remote for at least 3 seconds for the
command to be successfully learned.

7. Repeat steps 5 and 6 to store

more functions.

8. Once the selected functions are

stored press the

CODE SEARCH

button and the remote will return
to original operation mode.

The learning feature is used as a supplement to the standard
preprogrammed library. The standard code library provides most
of the functions needed, but you can add a small number of
additional functions of your choice.

NOTE: • No functions may be stored under the LEARN, SLEEP, CODE

SEARCH, MENU or any of the device button.

INDICATOR

LIGHT

(BLINK)

CODE

Clearing A Learned Button

1. Press and hold the

CODE-

SEARCH

button until the

INDICATOR LIGHT

lights,

then release the

CODE

SEARCH

button.

2. Press and release the desired

Mode button (

VCR

CABLE

AUX

, etc…).

The

INDICATOR LIGHT

will

turn off once the button press

is accepted.

3. Press and release the

LEARN

button twice. The

INDICATOR

LIGHT

will turn off once the but-

ton press is accepted.

4. Press and release the

CODE

SEARCH

button and the remote

will return to original operation
mode. All learned command
functions under the device are
now cleared.

To clear a learned button sequence, use the procedure below.

NOTE: .• No functions may be stored under the LEARN, SLEEP, CODE

SEARCH or any of the device button

Clearing All Learned Buttons or Functions

1. Press and hold the

CODE

SEARCH

button until the

INDICATOR LIGHT

lights,

then release the

CODE SEARCH

button.

2. Press and release the

LEARN

button twice. The

INDICATOR

LIGHT

will light off once the

button press is accepted.

3. Press and release the

CODE

SEARCH

button and the remote

will return to original operation
mode. All learned command
entries are now cleared.

This procedure will erase all learned functions in every
device mode. This step is recommended when attempting
any learning of a new function from a new remote.

VCR

• O

PLA

CH +

FOR

ARD

USE

ENTER

• VCR

REVERSE

RECORD

CODE SEARCH