(BLINK)
Programming With Code Search
1. Turn on the device you wish
to program.
2. Press and hold
CODE SEARCH
until the
INDICATOR LIGHT
lights, then release
CODE
SEARCH.
3. Press and release the device
button for the device you are
programming (
TV, VCR
or
DBS•CABLE
). The
INDICATOR
LIGHT
will blink once then
remain lit. DVD codes are
programmed under the VCR
button.
Note: For AUX, press
DVD•AUX
then
the device button you are
assigning to DVD•AUX.
4. Press and release
ON•OFF
until
your device turns off.
Important:
You may have to
press
ON•OFF
up to 200 times.
5. When your device turns off,
press the
ENTER
button, the
INDICATOR LIGHT
will go off.
If your TV, VCR, DVD, DBS or Cable Box does not respond after you have
tried all the codes for your brand, or if your brand is not listed, try
searching for your code by following the steps below.
Retrieving Codes
1. Press and hold
CODE SEARCH
until the
INDICATOR LIGHT
lights, then release
CODE
SEARCH.
2. Press and release the device
button for the device’s code
you are retrieving (
TV, VCR
or
DBS•CABLE
). The
INDICATOR
LIGHT
will blink once then
remain lit.
Note: For AUX, press
DVD•AUX
then the device button for the
code you are retrieving.
3. Press and release
CODE
SEARCH
. The
INDICATOR
LIGHT
will turn off.
4. Starting with
0
on the keypad,
press the number buttons in
order (
0-9
) until the
INDICATOR LIGHT
blinks.
5. The number which causes the
INDICATOR LIGHT
to blink is
the first digit of your code.
6. Repeat step 4 until you have
retrieved all three numbers in
the code.
If you need to find the three-digit code for your TV, VCR, DBS, DVD or
Cable Box after your device is set-up using Code Search, use this procedure.
…
(OFF)
INDICATOR
LIGHT
(BLINK)
VCR
TV
ON OFF
(OFF)
INDICATOR
LIGHT
11
CODE
SEARCH
CODE
SEARCH
CODE
SEARCH
DVD•AUX
DBS•CABLE
(BLINK)
VCR
TV
DVD•AUX
DBS•CABLE
RCU410RS_manual 4/11/01 11:58 AM Page 12
Содержание RCU410 - Universal Remote Control
Страница 19: ......