7
Program for Satellite, Cable Box or
Digital TV Converter—Direct Entry Method
SAT•
CBL•DTC
1. Manually turn on the satellite
receiver, cable box or digital TV
converter.
2. Locate the enclosed Code Lists. Find your
brand in the Satellite, Cable Box or Digital
TV converter codes.
Note:
If your brand isn’t listed, use
one of the Code Search methods to
program this remote control (See Code
Search on page 8).
3. Press and hold the
CODE SEARCH
key until the indicator light illuminates.
Then release the
CODE SEARCH
key.
4. Press and release the
SAT•CBL•DTC
key. The indicator light blinks and
then remains lit.
5. Use the number keys on the remote to
enter the first code listed for your brand.
After you enter a valid four-digit
code, the indicator light turns off.
Note:
If you enter an invalid code, the
LED will flash rapidly for 2 seconds.
Start over at step 3.
6. Aim the remote at your satellite
receiver, cable box or digital TV
converter and press the
ON•OFF
key. If
your device turns off, you have found
the correct code.
7. Enter the code in the box provided
on this page for future reference.
8. If your device doesn’t turn off, repeat
steps 3-6 above, entering the next code
for your brand.
If none of the codes work or your
brand is not listed, use one of the
Code Search methods to program
this remote (See Code Search on page 8).
For a description of each key on the
remote control, refer to the Key
Descriptions section page 3-4.
In order for the 3-component universal remote to control
your satellite, cable box or digital TV converter, you must
program it with the code that matches your component. The
SAT•CBL•DTC
key can be programmed to operate either a
satellite receiver, cable box or digital TV converter.
These instructions explain the preferred method of
programming the remote—the Direct Entry method.
ON•OFF
(BLINK)
(OFF)
CODE
SEARCH
INDICATOR
LIGHT
SATELLITE, CABLE
BOX OR DIGITAL TV
CONVERTER CODE
