EN
Exit Program Mode
Program mode will be deactivated once you
press
STOP
to end program playback.
Clearing Program List
Your program will be erased once you open the
disc compartment door or change to another
source mode (e.g. radio).
Displaying the Program List
1. While the CD player is stopped, press
SET
to enter program mode.
2. Press
SET
repeatedly to review the
program list.
CD player
Play Mode
Press
PLAY MODE/PRESET UP/
once to
repeat entire disc and [REPEAT] icon shows on
display.
Press
PLAY MODE/PRESET UP/
twice to
repeat current track and a flashing [REPEAT]
icon shows on display.
Press
PLAY MODE/PRESET UP/
a third time
to select random playback. The random
playback icon will be displayed.
Press
PLAY MODE/PRESET UP/
a fourth
time to select repeat random playback. REPEAT
and will be displayed.
Programming
When player is in CD stop mode,
1. Press
SET .
PROG. and TRACK
(flashing,
indicating program position) shows on
display.
2. Press
TUNE DOWN/BACK
or
TUNE UP/
NEXT
to select the track you want to
store in the program.
3. Press
SET
again to confirm your selection.
4. Repeat steps 2 to 3 to program to a
maximum of 20 tracks.
5. Press
PLAY/PAUSE
in program mode to
start program playback (PROG. appears on
display).
-
7
Tip
Tip
Tip
Tip
Tip
:
If you are in normal playback
mode but want to play the saved
program. Press
STOP
STOP
STOP
STOP
STOP
, then
SET
SET
SET
SET
SET
and then
PLAY/PAUSE
PLAY/PAUSE
PLAY/PAUSE
PLAY/PAUSE
PLAY/PAUSE
.
