7
Most difficulties associated with the Wireless Modem Jack
System are due to improper installation.
If the steps below do not solve your difficulty, remove both units
from the electrical outlets, remove all cords and reinstall making
sure to follow instructions on the previous page.
Your situation (system location, characteristics of the home/office)
can, in some instances, affect performance and occasional
interference may be experienced. Some static, buzzing or
humming at certain locations within the operating area is
possible. However, if you experience unusual levels of noise,
follow the trouble shooting actions below.
PROBLEM
ACTION
No dial tone
Check connections, check outlet for power,
try new cords, move base and/or extension.
Static/
Move base and/or extension (halogen lamps,
Interference
light dimmers, and computer surge
protectors can cause some static).
Can't dial out
Decrease distance between units. If
problems continue call customer service.
Does not ring
Decrease distance between units. If problems
continue call customer service.
Trouble Shooting
3. Once all extensions have been coded, you will need to verify
the dialtone at each location.
Your situation (system location, characteristics of the home) can, in
some instances, affect performance and occasional interference
may be experienced. Some static, buzzing or humming at certain
locations within the operating area is possible. However, if you
experience unusual levels of noise, follow the trouble shooting
actions below. If the steps below do not solve your difficulty,
remove both units from the electrical outlets, remove all cords and
reinstall making sure to follow instructions on the previous page.
RC930_IB.QXD 10/10/00 1:12 PM Page 7
