RCA R52WH73, Руководство пользователя

Страница: 25 / 64

Chapter
Using the Remote Control
INPUT
Press to toggle through the available input sources (VID1, VID2, FRNT,
CMP1, CMP2 and DVI).
MENU
Displays and clears the Main Menu.
Note: If you've just turned on the TV, the digital input takes some time to
become available (usually about 25 seconds). While it's getting ready, you won't
see the items related to the digital input in the menus. These items will show up
once the digital tuner is ready.
MUTE
Reduces the TV’s volume to its minimum level. Press again to restore the
volume. To program this button to work with devices connected to your audio
system, follow the instructions in the
Volume Punchthrough Feature section on
page 26.
OK
When a menu item is highlighted, press OK to select the item.
ON•OFF
When in TV mode, turns the TV on and off. If in another device mode
(SAT•CABLE, AUX or DVD) and programmed, will turn the device on and off.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE
If programmed,
provides transport control for some remote-controllable VCRs, DVRs, CD and DVD
players etc.
Important: The RECORD button has a safety feature that requires you to press it
twice.
SAT•CABLE (Satellite•Cable)
Places the remote in SAT/CABLE box mode. If Auto
Tuning is enabled, turns on the TV and tunes to the satellite or cable box Video
Input Channel for RCA devices. This button lights when you press a valid button in
SAT•CABLE mode (see
Modes of Operation on page 25 for more details).
SUB CH
(
Subchannel)
When entering a digital channel that has a subchannel,
press this button to access the subchannel entry field. Enter the subchannel and
press OK to tune to the channel.
TV
Places the remote in TV mode. Turns on the TV and tunes to the last-viewed
TV channel or input. This button lights when you press a valid button in TV mode
(see
Modes of Operation on page 25 for more details).
VOL – or VOL +
Decreases or increases the TV’s volume. To program this button
to work with devices connected to your audio system, follow the instructions in
the
Volume Punchthrough Feature section on page 26.
Programming the remote to Operate
Other Devices
The universal remote can be programmed to operate many brands of remote-
controllable VCRs, audio devices, DVD players, cable boxes, satellite receivers and
other devices. In addition to being programmed to operate your television, it’s
already programmed to operate most RCA devices.
Note:
The TV button can’t be programmed on this remote to control any
device; it controls only this TV.
Note:
The SAT•CABLE, AUX and DVD buttons
operate most RCA products.
Tip
To turn off all the RCA devices that are
connected to the TV, press ON•OFF twice
within two seconds.
This feature works with most RCA products.
Continues on next page...
Device Buttons
INPUT
ANT•CABLE
REVERSE PLAY FORWARD
STOP PAUSE RECORD
MENU CLEAR
FORMAT
SUB
CH
INFO GUIDE
MUTE
GO BACK
VOL CH
ON•OFF
SAT•CABLE AUX
DVD
TV