RCA Prodigi RDR1520 Series, Инструкция по эксплуатации

Страница: 22 / 39

Copyright © 2019 RCA Communications Systems
Prodigi
TM
RDR1520 Series Professional Digital Two-Way Radio Instruction Manual 22
around”, and the radio must be set to allow
talk around in the channel. Press the pre-
programmed key to switch the talk around
mode and repeater mode.
Check battery power strength
Press the pre-programmed “battery power
strength” key to hear the beep tones. When
the battery power is high you hear 3 beep
tones, when battery power is middle you hear
2 beep tones, and when battery power is low
you hear one beep tone.
Two time slot ON/OFF
This function can be set to ON and OFF, When
the function is ON, it will support the two time
slot function.
LED Indicator
The LED indicator shows the operational status
of your radio.
Blinking Red - Radio is scanning, Radio is
transmitting at low battery condition, receiving
an emergency transmission or has failed the
self-test upon powering up.
Solid Red - Radio is transmitting.
Blinking Green - Radio is powering up.
Solid Green -
Radio is receiving or carrier is
present/busy channel.
Rapidly Blinking Green - Radio is receiving a
privacy-enabled call or data.
Note: When the LED is solid green, it indicates
the radio detects activity over the air. Due to
the nature of the digital protocol, this activity
may or may not affect the radio’s programmed
channel.
Audio Tones
Alert tones provide you with audible indications
of the radio’s status or the radio’s response to
data received.
Continuous Tone - A monotone sound.
Sounds continuously until termination.
Periodic Tone - Sounds periodically depending
on the duration set by the radio.
Repetitive Tone - A single tone that repeats