background image

Copyright © 2015 RCA Communications Systems

29

MR240

TM

 

VHF Marine Two-Way Radio Instruction Manual

- The backlighting is automatically turned OFF 
after 5 seconds of inactivity.

■ 

LCD Contrast Setting (“LC”)

Set the LCD contrast level to high contrast or 

low contrast.

- The LCD contrast level has little effect during 

indoor use.

■ 

Power Save Function (“PS”)

The power save function reduces battery drain 
by  turning  OFF  the  receiver  circuit  for  preset 

intervals.

- OFF: Function is turned OFF

-  ON:  Function  is  turned  ON  and  will  be 
activated  when  no  signal  is  received  and  no 

operation is performed for 5 seconds.

■ 

Dual/Tri-watch Function (“dt”)

Set the watch type to Dualwatch or Tri-watch.

■ 

Monitor Key Action (“Sq”)

The  Monitor  Key  temporarily  opens  the 
squelch. This item sets the key action.

- “PU” (Push): The monitor function is activated 
by  holding  down  [MONI].  The  squelch  open 
while holding down the key.

- “Ho” (Hold): The monitor function is activated 
by  holding  down  [MONI]  for  1  second.  The 
squelch stays open until any key is pushed.

■ 

Automatic Backlighting (“bL”)

This  function  is  convenient  for  night-time 
operation.  The  backlight  can  be  changed  to 
ON and OFF.

Содержание MR240













































Отзывы: