33
References
Trouble Checks
Trouble When CD Is Playing
Here's What to Try:
Cannot hear audio
Sound is distorted
Portion of disc is repeated
Service code appears in display panel and on TV
screen (U1, U2, F5, P2, L3, E4, H0, H1, H2, or A0)
• Check connections to TV monitor and/or stereo amplifier/receiver.
• Make sure TV monitor and/or stereo amplifier/receiver are set to proper
positions to hear audio from player.
• Check connection terminals and/or plugs on audio/video cables to make
sure they are not dirty.
• Make sure the plugs on the audio/video cables are fully inserted into the
jacks.
• Player is in pause mode. Press
PLAY
.
• The player is connected to the
PHONO
jacks on the amplifier/receiver.
Make sure player is connected to
AUX, CD, VDP, LD
or
VCR
jacks.
• The terminals or plugs on the cables are dirty.
• Make sure the plugs on the audio/video cables are fully inserted into the
jacks.
• Player is set for hearing only one channel. Press
AUDIO
to select stereo
sound. Details are on page 21.
• Player is in repeat-play mode. Turn off repeat play. Details are on
pages 16-17.
•
U1 or U2
Disc is not loaded properly. Reload disc and press
PLAY
.
Disc is dirty. Wipe with soft cloth.
F5
Two disc are loaded on disc table. Remove one disc.
Disc is dirty. Wipe with soft cloth.
P2, L3, E4
Open the disc table and press
PLAY
. If the same code appears
again, take the player to an Authorized Servicenter. The
number displayed after
F, P, L,
or
E
depends on the condition
of the player. Tell the servicer which code the player displayed.
H0, H1,
Take the player to an Authorized Servicenter, and tell them
H2,
or
A0
which code the player displayed.