Using the Menu System
26
Chapter 4
Graphics contained within this publication are for representation only.
Advanced Picture Settings
Black Level
Adjusts the amount of light the picture emits for the
darkest areas of an image. Select
0 IRE
when the dark colors
appear too dark; select
7.5 IRE
to enhance the dark contrast in the
picture.
Backlight Adjust
Press the right arrow button to scroll through
the adjustments to the TV screen, depending on room lighting:
Soft
;
Normal
; and
Bright
.
Film Mode
(Also known as 3:2 Reverse Pulldown)
Detects and
converts film content for better display with minimal artifacts. If
you’re watching a movie, turn on (box has check mark).
Noise Reduction
Reduces the picture “static” or any type of
interference. Select
None
if the signal is clear;
Level 1
if the signal
has minimal static;
Level 2
if the signal has some static; and
Level 3
if the signal has a lot of static.
Sound Menu
The
Sound
menu lets you adjust audio output. To access the
Sound
menu, press MENU on the remote, and then select
Sound
from the
main menu.
Volume
Increases or decreases the volume coming from the TV’s
speakers.
Treble
Increases or decreases the treble.
Bass
Increases or decreases the bass.
Balance
Press the right arrow button to increase the audio output in
the right speaker; press the left arrow button to increase the audio
output in the left speaker.
Sound Type
Press the right arrow button to scroll through the
available audio types, which control the way the sound comes through
your speakers:
Mono, Stereo
and
SAP (Second Audio Program).
Note:
Sound Type is not available for VID2 input channel.
Mono
plays the sound in mono only. Use this setting when
receiving broadcasts with weak stereo signals.
Use
Stereo
to split the incoming stereo audio signal into left and
right channels. Most TV programs and recorded materials have
stereo audio.
SAP
plays the program’s audio in a second language, if one is
available. SAP audio is broadcast in mono. SAP is also used to
broadcast a program’s audio with descriptions of the video for the
visually impaired.
Note:
SAP is not available for input channels.
Mute
Press the right arrow button to turn on or off the volume to the
TV speakers.
Auto Volume Level
Turn on this feature to reduce blasts in volume
during commercial breaks to create more consistent audio output.
Adv. Picture Settings
Black Level
0 IRE. . .
Backlight Adjust
Normal. . .
Film Mode
Noise Reduction
Level 1. . .
Press </> to select. Press MENU to go to Picture Menu.
Sound
Volume
Treble
Bass
Balance
Sound Type
Mono. . .
Mute
Auto Volume Level
Press </> to adjust. Press MENU to go to Main Menu.
16278150.04 Menu
12/11/03, 2:04 PM
26
