Registration:
Base Station:
1. Press and hold the button until the LED flashes blue.
Deskphone:
2. Press the key and select the base station you want to pair
with the deskphone.
3. If the deskphone requests a PIN, enter 7227 and press OK to
confirm.
Making a call
• Pre-/Direct Dialing: enter the phone number and press
or Send and lift handset.
• Speakerphone: enter the phone number and press
or vice versa.
• Headset (RJ9): enter phone number and press or Send,
then press .
Accepting a call
• With Handset: pick up the handset.
• With RJ9 Headset: press .
• With Handsfree: press .
Putting a call on hold
1. Press
Hold
soft key,
2. While a call is on hold, press
Unhold
soft key to un-hold.
Note: with 2 active calls, select call with Line Keys or “Switch” soft
key.
3-party conference
1. Once in line with 1st caller, press
2nd Call
soft key to activate 2nd
call.
2. Choose
intercom/external.
3. Select a line to place the call.
4. Dial 2nd party number and press or dial.
Call Transfer
Attended transfer
1. Once in line with 1st caller, press
2nd Call
soft key to activate 2nd
call.
2. Choose
intercom/external.
3. Select a line to place the call.
4. Dial 2nd party number and press or Send;
5. When the 2nd call is answered, select
Tran
soft key to transfer.
Blind transfer
1. Once in line with 1st caller, press
Tran
soft key.
2. Dial the destination telephone number and press
Tran
soft key
to transfer.
Call Forward
• Press
Menu
soft key -> 1. Service -> 2. Call Forward, to setup.
Navigation Keys
Voicemail
Redial
Headset (RJ9)
Missed Call Log
Navigation Key, OK
Key Lock/Unlock
Volume Up
Volume Down
Speakerphone
Mute
Line Key
Soft Key (4)
Direct Dial Access Key (12)
Desktop LED Indicators
Status LED “OFF”
Normal
Status LED “Steady On”
Missed Call
Status LED “Flashing”
Ringing
“ON”
Voice Mail Alert
“ON”
Speakerphone On
Base LED Indicators
Steady
Base is connected to network or router
Off
Base not yet up or no network connection
Alternating Amber and Blue
DECT registration mode
Flashing Blue
Software upgrade in progress