FCC. This handset has also been tested and meets the
c)
The USOC jack required [RJ45]
d)
Facility Interface Codes (“FIC”) [N/A]
e)
Service Order Codes (“SOC”) [N/A]
f)
The FCC Registration Number [US:
3F8IPNANIP162
]
9.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone
company. The REN for this product is part of the product identifier that has the
format US:AAAEQ##TXXXX. The digits represented by ## are the REN without
a decimal point. For this product the FCC Registration number is [US:
3F8IPNANIP162
] indicates the REN would be
NAN
.
11 this equipment is hearing aid compatible
Specific
Absorption
Rate
(SAR)
information
SAR tests are conducted using standard operating positions accepted by the
FCC with the phone transmiting at its highest certified power level in all tested
frequency bands, although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be well below the
maximum value, in general, the closer you are to a wireless base station antenna,
the lower the power output. Before a new model phone is a available for sale to
the public, it must be tested and certified to the FCC that it does not exceed the
exposure limit estabilished by the FCC. Tests for each phone are performed in
positions and locations (e.g. at the ear )as required by the
FCC RF exposure guidelines. Use of other accessories may Non-compliance with
the above restrictions may result in violation of RF exposure guidelines.
Содержание IP162
Страница 1: ...IP162 IP DECT Phone ...
