RCA HD52W66, Руководство пользователя

Страница: 26 / 64

24 Chapter 2
Using the Remote Control
Programming the Remote to Operate
Other Components
The universal remote can be programmed to operate many brands of remote-
controllable VCRs, audio components, DVD players, cable boxes, satellite
receivers and other components. In addition to being programmed to operate
your television, it’s already programmed to operate most RCA components.
The AUX•HD button can be programmed to operate most brands of an
additional remote-controllable component: satellite receiver, cable box,
DVD, VCR, and an audio component. A second and third RCA TV can be
programmed to any component button, except the TV button.
Note:
The TV button can’t be programmed on this remote to control any
component; it controls only this TV.
Find Out If You Need to Program the Remote
To determine whether the universal remote needs to be programmed to operate
one of the components connected to your TV, such as a DVD player, do the
following:
1. Turn on the component (in this example, a DVD player).
2. Point the remote at the component.
3. Press the corresponding component button (in this example, DVD).
4. Press ON•OFF to see if the DVD player responds. If the DVD player
doesn’t respond, you need to program the remote to operate it.
Programming the Remote
There are two ways to program the remote control to operate other
components:
Automatic Code Search and Direct Entry .
Using Automatic Code Search
Note:
The AUX•HD button can only search VCR codes, but can be used for
a non-VCR device by programming it with direct entry method. By default,
the AUX•HD button is programmed for an RCA HDTV Tuner receiver.
The following instructions can be used to program the remote to operate each
of your components. If you want to stop the automatic code search without
programming any of your components, press the CLEAR button until the
component button you’re trying to program turns off.
1. Turn on the component you want to control (VCR, satellite receiver, etc.)
2. Press and hold the button you want to program. While holding the
component button, press and hold ON•OFF until all of the component
buttons (VCR, TV, DVD, AUDIO, AUX•HD, and SAT•CABLE) fl ash. Then,
release both buttons.
3. Point the remote at the component, press and release PLAY, then wait fi ve
seconds or until the component button you’re trying to program stops
fl ashing.
You’ll use these buttons for the
Auto Code Search.
Important: The remote may not
be compatible with all models of
all brands of components. It also
may not operate all functions of
the remote that came with your
component.
Tip
To stop the automatic code search without
programming any components, press and hold
CLEAR until the component button on the
remote turns off.
STOP PAUSE PP
TV
ON•OFF
AUX•HD DVD SAT•CABLE SA SA
CC PRESETS FREEZE SOUND
PLAY PLA PLA FORWARD W W REVERSE
GUIDE
GO BACK
CH
+
CH
-
VO
L
VO
L
FORMAT FORMA FORMA MUTE
INFO
MENU
CLEAR
SKIP
ANT•CAB
1 3
4 6
7 8 9
0
INPUT
VCR
AUDIO
OK OK
RECORD
BACKLIGHT
GUIDE
GO BACK
CH
+
CH
-
VO
L
VO
L
FORMAT MUTE
INFO
MENU
SKIP
OK OK
BACKLIGHT
PAUSE
CC PRESETS FREEZE SOUND
FORWARD
RECORD
1 2 3
4 5 6
7 8 9
0