23
Using the Remote
CLEAR
Removes any menu or display from the screen and returns you
to TV viewing. Also exits the GUIDE Plus+ menu system.
(0-9) Number Buttons
Enters channel numbers and time settings
directly though the remote control. To enter a two-digit channel, press
the two digits. To enter a three-digit channel, press and hold the first
digit, then add the second two. Example: to tune to channel 123, press
and hold 1, press 2, then press 3.
WHO•INPUT
In TV mode, press to toggle through the available input
sources (VID/SVID and the current channel). In SAT mode, press to select
available channel lists.
ANTENNA
Functions as TV/VCR button in VCR mode and TV/receiver
button in SAT•CABLE mode.
REVERSE, PLAY, FORWARD, REC•VCR+, STOP, PAUSE
If programmed,
provides transport control for some remote-controllable VCRs, DVD
players, laserdisc players, tape decks, and CD players. Pressing REC•VCR+
when using the GUIDE Plus+ system sets the VCR to record a program.
PIP
Brings up the small picture-in-picture window. Press again to
remove the PIP window. When PIP Caption Display - Alternate with PIP -
has been selected, will display captioning in the PIP window.
SWAP
Swaps the main picture with the PIP window.
CH CTRL
Selects the picture window (that is, the main or PIP window)
to be changed by the CH ^ (channel up), CH v (channel down), or
WHO•INPUT buttons.
RESET
Resets picture quality controls to the Bright Lighting Picture
Control Preset. Point and select to choose a different Picture Control
Preset. Also used to reset the settings in a menu.
Using the WHO•INPUT Button
Use the WHO•INPUT button to toggle through the available input sources
(VID and the current channel) and view the component you have
connected to the TV.
1.
Press TV to place the remote in TV mode. Make sure that the
component you want to view is turned ON.
2.
Press WHO•INPUT to tune to the available input source and view the
component.
3.
Press WHO•INPUT again to tune back to the channel you were
previously watching.
Modes of Operation
Because this universal remote can control
several different components (DVD
player, VCR, Cable Box, etc.) it uses
operational modes triggered by the
component buttons. For example if you
want the remote to control the TV, you
would press the TV button to put the
remote into TV mode before you could
control the TV.