RCA F31317, Руководство пользователя

Страница: 39 / 64

Using the TV’s Features
Chapter 3 37
1. Press MENU (the TV MAIN MENU appears).
2. Highlight Channel and press OK on your remote control.
3. Highlight Auto Tuning and press OK.
4. Choose which channel you would like to set:
Set VCR 1 Channel Displays a list that lets you set up the channel that the
TV tunes to when you press the VCR1 button on the remote.
Set VCR 2 Channel Displays a list that lets you set up the channel that the
TV tunes to when you press the VCR2 button.
Set DVD Channel Displays a list that lets you select the channel that the
TV tunes to when you press the DVD button.
Set SAT/CABLE Channel Displays a list that lets you set up the channel
that the TV tunes to when you press SAT•CABLE.
5. Highlight the choice that matches the way you have the component
connected to this TV, and press OK.
The choices and a brief explanation follow:
Not connected
Choose this if you don’t have this particular component
connected to the TV, or if you don’t want the TV to automatically tune to the
correct channel when you’re using this component.
Channel 2
(SAT/CABLE only) Component (satellite or cable box) is
connected to the CABLE/ANTENNA jack on the back of the TV, and you want
the TV to tune to channel 2 when you press the SAT• CABLE button on the
remote. Reminder: make sure the component’s Channel 2/3/4 switch is set to
channel 2. Usually this switch is on the back of the component.
Channel 3
Component is connected to the CABLE/ANTENNA jack on the back
of the TV, and you want the TV to tune to channel 3 when you press the
corresponding button on the remote. Reminder: make sure the component’s
Channel 3/4 switch is set to channel 3.
Channel 4
Component is connected to the CABLE/ANTENNA jack on the
back of the TV, and you want the TV to tune to channel 4 when you press the
corresponding button on the remote. Reminder: make sure the component’s
Channel 3/4 switch is set to channel 4.
Video Input
Component is connected to the VIDEO jack on the back of the
TV and you want the TV to tune to VID (SVID if you used an S-Video cable)
Input Channel when you press the component button.
Note: You should choose this for your VCR if you connected it to the TV
with audio/video cables.
TV MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
CHANNEL
2 Auto Channel Search
3 List and Labels
5 Video Input Source
0 Exit
4 Auto Tuning
1 Signal Type
1 Not connected
2 Channel 2
3 Channel 3
4 Channel 4
5 Video Input
SET VCR1 CHANNEL