2
GETTING STARTED
Channel Marker
The Channel Marker comes up when you first turn on the TV, change
channels, or press the DISPLAY button.
The Channel Marker shown is just an example
of what your screen may look like.
You can press MENU or CLEAR to
make the Channel Marker disappear,
or it will disappear automatically
after a short time.
Caution
If you choose to use a stand with
your TV, take precautions that the
stand or other furniture the TV is
placed on is properly located and of
adequate size and strength to
prevent the TV from accidentally
being pushed off, pulled off, or
tipped over. This could cause damage
to the TV and/or personal injury.
Sleep
Mute
13
7:17
CC
1:30
01:30
Displayed to count down time left on the commercial skip timer.
13
Displays the current channel.
7:17
Displays the current time.
CC
Displayed when Closed Captioning is available.
Mute
Displayed when you mute the audio.
Sleep
Displayed when the Sleep Timer has been set.
Front Panel Controls
CHAN ^
Scans up through the channel list. When a menu is displayed,
CHAN
^
points up to items and adjusts menu controls.
CHAN v
Scans down through the channel list. When a menu is displayed,
CHAN
v
points down to items and adjusts menu controls.
MENU
Brings up the Main menu. When in the menu system, it selects
highlighted items. Also returns you to the previous menu.
POWER
Turns the TV on and off.
VOL -
Decreases the volume. When in the menu system, VOL - is used
to point left to items and adjust menu controls.
VOL +
Increases the volume. When in the menu system, VOL + is used
to point right to items and adjust menu controls.
Front Panel Lock
This feature allows you to lock the buttons on the front of the TV. Even
when the front panel lock feature is ON, the TV operates with the remote
control.
• To lock the buttons on the front of the TV, make sure the TV is turned
ON, then press and hold the POWER button on the remote for
approximately 5 seconds.
• To turn off the front panel lock, make sure the TV is OFF, then press
and hold the POWER button on the remote for approximately 5
seconds. Now the buttons will operate properly.