RCA DVR2080, Руководство пользователя

Страница: 62 / 100

60 Chapter 4
Using the TV’s Menu System
Audio Connections
7
Balance
6
SAP
5
Audio Mode
4
Sound Logic Sound Logic
3
Audio Processor
2
Equalizer Presets 1
Go Back
0
Main Menu Audio
Press or to point to an option, then press OK to
select it. Press to return to the menu.
Turning Sound Logic on will monitor a program's audio
track and limit volume excursions to a minimum and
maximum volume range from the current volume setting.
Acting like a dynamic range limiter, it compresses the
dynamic range to limit sudden volume increases (for
example, the sudden increase in volume you sometimes hear
when a commercial starts).
A change in this screen is applied to all inputs.
Off
On
Audio Connections
7
Balance 6
SAP
5
Audio Mode
4
Sound Logic
3
Audio Processor Audio Processor
2
Equalizer Presets
1
Go Back
0
Main Menu Audio
Press or to point to an option, then press OK to
select it. Press to return to the menu.
Select a default for sound expansion:
A change in this screen is applied to all inputs.
SRS
SRS TruSurround XT
Off
Stereo
Mono
Select a default for NTSC (analog) sources:
SRS FOCUS
TruSurround XT, SRS and ( ) symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
Audio Processor
The Audio Processor displays a choice list of available audio modes, which
control the way the sound comes through your speakers when TV is set to
using the
Variable Output . The selected setting affects all inputs and tuners.
To create the settings:
1. Press the MENU button to access the main menu.
2. Select Audio , and then Audio Processor. The following options appear:
Mono
Plays the sound in monophonic audio only. This should only be
used when the stereo signal is weak. The channel banner displays the word
Mono when you have selected Mono and SRS is turned off.
Stereo
Splits the incoming stereo audio signal into left and right front
channels. Most TV programs and recorded materials have stereo audio. The
channel banner displays the word
Stereo when you have selected Stereo
and SRS is turned off.
The following options are available only if the Fixed/Variable Output is set to
Variable:
Off No SRS processing is applied to the audio.
Adds greater depth and stereo separation to stereo audio signals.
Delivers a panoramic 3D sound stage from stereo material. Use the SRS
FOCUS adjustment on the right to adjust the clarity.
Creates a virtual surround sound from multichannel source material
through any two-speaker playback system. Use the SRS Dialog Clarity
adjustment on the right to adjust the clarity.
Sound Logic
Acting like a dynamic range limiter, it compresses the dynamic range to limit
suggested volume increases (for example, the sudden increase in volume you
sometimes hear when a commercial starts). Choose
On or Off, depending on
your preference.