EN-1
SAFETY PRECAUTIONS
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance (MLB International Inc., PO Box 1214, Lockport, NY, 14095, Tel: 716-240-
0902) could void the user’s authority to operate the equipment.
Warnings:
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• The AC adapter is used as disconnect device and it should remain readily accessed
during intended used. In order to disconnect the apparatus from the mains completely,
the AC adapter should be disconnected from the mains socket outlet completely.
• Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilation.
• Battery- shall not be exposed to excessive heat such as sunshine, fire or the like.
• The ventilation should not be impeded by covering the ventilation openings with
items such as newspaper, table-cloths, curtains, etc.
• No naked flame sources such as lighted candles should be placed on the apparatus.
• AC adapter and the apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on AC adapter and apparatus.
On Use
Never use the unit where it would be subject to:
- Heat sources such as radiators or air ducts.
- Direct sunlight.
- Excessive dust.
- Moisture or rain.
- Mechanical vibration or shock.
- Uneven surface.
• Do not place any heavy objects on top of the unit.
• When the unit is used with an AC power adapter, do not wrap the unit in a cloth, blanket,
etc.. If you do so, the temperature inside and outside the unit may rise considerably,
resulting in malfunctioning of the unit.
• For the unit to operate at its best, it should not be subject to temperatures below 41°F
(5°C) or above 95°F (35°C).
Equipment tested for
compliance as a complete unit
DTA880