1.
OPEN/CLOSE Button
Press to open or close the disc tray.
2. STANDBY/ON Button
Press to turn on the unit or put it in standby
mode
3. AUDIO Button
Press to select one of the audio sound
tracks programmed on a DVD or to select
the audio output mode on an audio CD.
4. ANGLE Button
Press to switch the camera angle of the
video presentation when scenes with
multiple camera angles are recorded on a
DVD.
5. MEMORY Button
Press to create programs.
6. DISPLAY Button
Press to change disc status information
displayed on the TV screen.
7. SETUP Button
Press to open or close the SETUP menu
screen
8. CURSOR ( , , , ) Button
Press to highlight selections on a menu
screen and adjust certain settings.
OK Button
Press to confirm selections on a menu
screen.
9. CLEAR Button
Clear input selections and cancel certain
playback functions.
10.
PLAY Button
Press to start playback.
11.
STOP Button
Press to stop playback.
12.
SEARCH Button
Fast reverse playback.
13.
REV Button
Press to move backwards through titles,
chapters or tracks on a disc.
14. Number (0-9) Buttons
15. A-B REPEAT Button
Press to perform point-to-point repeat
playback on a DVD or CD.
16. SOURCE Button
Selects input sources.
17. SUBTITLE Button
Press to select one of the subtitle languages
programmed on a DVD.
18. ZOOM Button
Zoom in an image.
19. RETURN Button
Press to return to normal operation after
using SETUP or go to DISC MENU if
available.
20. TITLE Button
Press to open the title menu screen.
21. MENU Button
Press to open or close the DVD’s menu.
22. HDMI Button (for HDMI connection only)
Press once to view current HDMI output
resolution. Press repeatedly to change
resolution (Auto, 480P, 720P, 1080i, or
1080P).
23. PAUSE Button
Press to pause playback, frame advance.
24.
SEARCH Button
Fast forward playback.
25.
NEXT Button
Press to move forward through titles,
chapters or tracks on a disc.
26. SLOW Button
Press to perform slow forward playback of
DVDs.
27. GOTO Button
Press to skip directly to a specific location
on a DVD.
28. DISC REPEAT Button
Press to repeat chapter or title of a DVD.
Press to repeat single track or whole CD.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation
openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding - type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong is
provided for your safety. When the provided
plug does not fit into your AC power outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the AC power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as the AC power cord or plug is
damaged, liquid has spilled or objects have
fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY
INSTRUCTIONS
Disc Formats
Region Management Information
This unit is designed and manufactured to respond to the Region Management Information that is
encoded on DVDs. If the region number printed on the DVD does not correspond to the region number
of this unit, it cannot play that disc.
The region number of this unit is 1.
Disc Function or Operation that is Not Available
When the
appears on the screen, it indicates that the function or operation attempted is not
available at that time. This occurs because the DVD manufacturer determines the specific functions
of DVDs. Certain functions may not be available on some DVDs. Be sure to read the documentation
provided with the DVD.
The unit can playback:
Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
sounD system
Dolby Digital
Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital
can reproduce from one to 5.1 discrete channels of excellent quality audio.
The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for
two-channel listening. An additional Dolby Digital decoder is required for reproduction of the discrete
multi-channel soundtracks available on many DVDs.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
accessories
control reFerence guiDe
Remote Control
Using the Remote Control
• Point the remote control at the REMOTE
SENSOR located on the unit.
• When using this unit in very bright light, the
infrared REMOTE CONTROL SENSOR may
not work properly.
• The recommended effective distance
for remote operation is about 16 feet (5
meters).
Battery Replacement
When the batteries become weak, the operating
distance of the remote control will be greatly
reduced and you will need to replace the
batteries.
Note:
• If the remote control is not going to be used
for a long time, remove the batteries to
avoid damage caused by battery leakage
corrosion.
• When discarding batteries, environmental
problems must be considered and local
rules or laws governing the disposal of these
batteries must be strictly followed.
• Do not mix old and new batteries. Do not mix
ALKALINE, standard (CARBON-ZINC), or
rechargeable (Ni-Cd, Ni-MH, etc) batteries.
WARNING:
• Do not dispose of the battery in fire or it may
explode or leak.
• Batteries shall not be exposed to excessive
heat such as sunshine, fire or the like.
CAUTION:
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
remote control
DVDs
[8cm/12cm disc]
Audio CDs
[8cm/12cm disc]
Compatible
Unit
Front Panel
Rear Panel
1. DISC TRAY
Opens or closes the tray by pressing the
OPEN/CLOSE button.
2. REMOTE SENSOR
Receives the remote control unit signals.
3. DISPLAY WINDOW
Display units information.
4. Power Indicator
Indicator Off: The unit is turned on.
Indicator On: The unit is in standby mode.
5. ON/STANDBY Button
Turns the unit on or puts it in standby
mode.
6. OPEN/CLOSE Button
Opens or closes the tray.
7. PLAY Button
Starts or resumes playback of a disc.
8. SOURCE Button
Selects input sources.
9. SD card slot
10. USB port
11. OPTICAL OUT jack
12. HDMI OUT jack
13. VIDEO OUT jack
14. DIGITAL COAXIAL AUDIO OUT jack
15. LEFT/RIGHT AUDIO OUT jacks
SYMPTOM CAUSE (AND REMEDY)
• Ensure the AC power cord is connected.
• The unit is not turned on.
• Remove any obstacles between the remote and the unit
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace the batteries in the remote with new one.
• Make sure that you select ON mode.
• The system is in pause mode. Press the
PLAY
button to return to
normal play mode.
• The unit is in fast-forward or fast-reverse mode. Press the
PLAY
button
to return to normal play mode.
• Make sure the AUDIO output is correct.
• Make sure the audio cable is connected securely.
• The region number of the disc doesn’t match the region number of this
unit.
• The TV is not set to receive DVD signal output.
• The video/HDMI cable is not connected securely.
• The TV is not turned on.
• Clean the disc.
• Check connection between HDMI TV and the unit.
• Replace the HDMI cable with a better one. Bad HDMI cable can cause
data lost.
• Press HDMI key on remote handset several times to toggle among
different HD OUTPUT.
• Check the connections.
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened
with alcohol.
• Clean the disc.
• There is no disc inside. (“No Disc” appears on the screen).
• Insert the disc correctly with the playback side facing down.
• Clean the disc.
• The unit and disc region number are incompatible.
• Condensation may have formed inside the unit due to a sudden change in
temperature. Wait about an hour for it to clear and try again.
• Ensure that the video file has been converted to DivX format using the
DivX Plus Player on your PC or MAC.
• Not all video files are encoded to allow for playback on DivX Certified®
products.
• Some video files may have been encoded with errors.
• Reset the unit, press the STANDBY/ON button to turn off the unit, wait for
a few seconds, then restart the unit.
No power.
The remote control
does not function.
No sound or only a
very low-level sound
is heard.
No
picture
or
abnormal color.
No output on your
HDMI TV.
Severe hum or noise
is heard.
The disc does not
play.
Video file won’t play
on device
The
DVD
door
cannot open.
troubleshooting guiDe
saFety Precautions
The lightning flash with an arrowhead
symbol, within the equilateral triangle, is
intended to alert the user to the presence of
uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to cause an electric shock.
The exclamation point within the equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in this
user manual.
CAUTION
INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM.
THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
On Placement
• Do not use the unit in places that are
extremely hot, cold, dusty, or humid.
• The ventilation should not be impeded by
covering the ventilation openings with items
such as newspaper, table-cloths, curtains,
etc.
On Safety
• When connecting or disconnecting the AC
power cord, grip the plug and not the cord
itself. Pulling the cord may damage it and
create a hazard.
• When you are not going to use the unit for a
long period of time, disconnect the AC power
cord.
• No naked flame sources such as lighted
candles should be placed on the AC power
cord and the unit.
• Leave a minimum of 10cm around the
apparatus for ventilation.
• Attention should be drawn to the environmental
aspects of battery disposal.
• Use of apparatus in moderate climates.
On Condensation
• When left in a heated room where it is warm
and damp, water droplets or condensation
may form inside the unit. When there is
condensation inside the unit, the unit may
not function normally. Let the unit stand for
1 to 2 hours before turning the power on, or
gradually heat the room and let the unit dry
before use.
Rating Plate Location
• The rating plate is located on the back of unit.
FCC Statements
NOTE: This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/
TV technician for help.
Warning:
Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
This unit has earned the ENERGY
STAR.
• Should any trouble occur, disconnect the AC power cord and refer servicing to a
qualified technician.
• Main plug is used as the disconnect device, it shall remain readily operable and
should not be obstructed during intended use. To be completely disconnected the
apparatus from supply mains, the main plug of the apparatus shall be disconnected
from the mains socket outlet completely.
WARNING
Notes on Copyright
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, or rent
copyrighted material without permission.
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
This product
contains a low power
laser device.
User manual
DRC288SU
Please check and identify the supplied accessories.
• To order accessories, visit web site http://www.RCAav.com
Remote Control .......................................................................................................... x 1
2xAAA batteries .......................................................................................................... x 1
AV cable ..................................................................................................................... x 1
Notes on Unauthorized Discs
You may not be able to play some DVDs on
this unit, particularly if they were purchased
from outside your geographic area or made
for business purposes.
maintenance
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop out
during playback. Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
• NEVER use solvents such as benzine or alcohol to clean the disc.
• Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause
malfunctions.
Cleaning the Unit
• Be sure to turn the unit off and disconnect the AC power cord before maintaining the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that
has been dipped in a weak soap-and-water solution and wrung out thoroughly, then wipe with a dry
cloth.
• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air
to remove dust.
Important Note
Before transporting the unit, remove the disc from the disc compartment.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING:
THE APPARATUS SHALL NOT BE
EXPOSED TO DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHALL BE PLACED ON APPARATUS.
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE THE
APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION:
DANGER OF EXPLOSION IF BATTERY
IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
CAUTION:
TO REDUCE THE RISK OF FIRE,
DO NOT PLACE ANY HEATING OR COOKING
APPARATUS BENEATH THIS UNIT.
CAUTION:
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF
POWER OUTLET, THEN FULLY INSERT.
The symbol for Class
II (Double Insulation)
Caution Marking and rating plate was located at
rear enclosure of the apparatus.
Portable Cart Warning
2. Insert two AAA size batteries.
1. Open the battery door.
To Change Remote Batteries
setuP anD connections
CONNECTING TO A TV
The unit can be connected to your TV in several different
ways, depending on the design of your TV.
Note: Use only one of the below listed connection
method for connecting to your TV.
A. RCA AUDIO/VIDEO JACKS
Use the Audio/Video cable (included).
Connect the VIDEO OUT and left/right
AUDIO OUT jacks on the unit to the VIDEO
IN and left/right AUDIO IN jacks on your TV.
It is important to read this instruction prior to using your new product for the first time.
-
1
-
-
2
-
-
3
-
-
4
-
-
5
-
B. CONNECTING TO A DISPLAY (Using a
HDMI cable)
For TVs that support it, HDMI can provide the
best quality audio and video output (depending
on media source), and so is the preferred
connection type. The HDMI cable incorporates
both audio and video signals, so you will have
just one cable running from the unit to your TV.
Using the HDMI cable (not included), connect
the HDMI OUT jack on your unit to the HDMI IN
jack on your TV or HDMI-compatible display.
• Set an output signal from the HDMI terminal
of the DVD player in accordance with your
TV’s input signal
• When using HDMI cable, set the “Digital
Out” menu under “Audio” menu to be “PCM
(STEREO)”
• Press the HDMI button on the remote control
to change output signals as below:
480p (progressive)
720p (progressive)
1080I (interlace)
1080p (progressive)
Note:
• Refer to your owner’s manual to the
connected TV as well.
• When you connect the DVD player to your
TV, be sure to turn off the power and unplug
both units from the wall outlet before making
any connections.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI licensing LLC.
CONNECTING TO OPTIONAL EQUIPMENT (AMPLIFIER)
A. ANALOGUE CONNECTION
Using an audio/video cable, connect the left/right
AUDIO OUT jack on your unit to the AUDIO IN
jack on your other source.
B. DIGITAL CONNECTION
Using a coaxial digital audio cable (not included),
connect the DIGITAL COAXIAL OUT jack on
your unit to the DIGITAL AUDIO IN jack on your
other source.
TV
red
whit
e
yellow
AV cable
DRC279RE
DRC279RE
Amplifier of
stereo system, etc.
AUDIO IN
ANALOGUE CONNECTION
red
whit
e
Audio cable
(red and white)
DRC279RE
Audio equipment with
digital audio input jack
DIGITAL
AUDIO IN
DIGITAL CONNECTION
Coaxial Digital
Audio cable
1
2
3
5
9
10
6
4
7 8
To wall outlet
11
12 14 15
13
1
16
17
19
21
22
23
25
24
20
18
26
27
28
2
4
6
7
9
11
13 12
10
8
5
3
14
15
Icons Used on DVDs
Sample lcons
Note: When playing back a CD-G (Graphics) or
CD EXTRA disc, the audio portion will be played,
but the graphic images will not be shown.
Note:
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the
equipment from the wall outlet before making any connections.
• If the external equipment is television and this audio system is close to it, you may experience the
interference if the tuner function is selected while the television is working.
• Refer to the instruction manual of the connected equipment as well.
USING USB PORT
You can connect a USB flash driveS (not included) to the USB port on the unit to play DivX®
movies
as well as picture files.
• Plug the USB flash drive into the USB port on the unit.
• Press SOURCE button to select USB mode.
For operation of file playback on the USB flash drive, please refer to the section “PLAYING DivX®
VIDEO OR PICTURE FILES”.
Note:
• It is recommended USB flash drive is plugged when the unit is in STANDBY mode.
• It does not support USB harddisk mass storage device, multi-card reader and other USB computer
peripheral.
• It only supports USB flash drive (FAT32/16 max. capacity 32G bytes, video bitrate is 7Mbps).
• Make sure your USB flash drive or SD card is FAT16/FAT32 file system. All other file system will
not be supported.
USING SD CARD SLOT
You can connect a Secure Digital (SD) card (not included) to the memory card slot on the unit to play
DivX movies as well as picture files.
• Plug the SD card fully into the memory card slot on the unit until it clicks.
• Press SOURCE button to change to memory card mode. It reads the information of the SD card and
playing the picture and/or sound files.
For operation of playing files on the SD card, please refer to the section “PLAYING DivX®
VIDEO OR
PICTURE FILES”.
Note:
• It is recommended the SD card is plugged when the unit is in STANDBY mode.
• If the SD card is oriented incorrectly, it will not go fully into the slot. Do not apply force when
inserting the SD card.
• To remove the SD card, push the CD card into the slot and then slowly remove your finger, the lock
is released and the SD card is pushed out.
Title, Chapter and Tracks
• DVDs are divided into
“titles”
and
“chapters”
.
If the disc has more than one movie on it, each
movie would be a separate
“title”
.
“Chapters”
are
sections of titles.
• Audio CDs are divided into
“tracks”
. A
“track”
is
usually one song on an Audio CD.
Note:
Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded on
them, but some do not.
DRC288SU IB ENG.indd 1
5/12/2010 12:19:16 PM
