15
Chapter 3: Playing Discs (DVDs)
To Load and Play a DVD Disc
Turn on the TV and your DVD Player (press ON•OFF on the remote or press the STANDBY/ON button
on the DVD Player).
1. If necessary, tune the TV to its Video Input channel (if you need more information, go to page 61).
2. Press the OPEN/CLOSE button (the disc tray opens).
3. Place a disc gently into the tray with the disc’s label facing up (double-sided discs have content on
both sides, so you can place either side up).
4. Press the OPEN/CLOSE or PLAY button. The disc tray closes. The DVD Player reads the disc’s table
of contents, and then one of three things happens depending on how the disc was programmed:
• The disc starts playing.
• The disc menu appears on the screen. One of the options will start disc play. Highlight that option
and press OK.
• The DVD Player’s main menu appears on the screen. Highlight the
Play
option and press OK.
When you stop playing a disc, the player remembers where you stopped. When you start playing the
disc again, the DVD Player picks up where you left off unless the disc is removed or the player is
unplugged, or if you press the STOP button twice.
C
an
't Cat
ch U
p
C
an
't Catch U
p
Can
't
C
at
ch
Up
(Widescreen
Ve
rs
io
n)
This is an example of a
two-sided disc — the title
is usually in the center
of the disc.
This is an example of a
one-sided disc.
1590940A 3/7/02 9:22 AM Page 15
