Chapter 2: Advanced Information
Illustrations contained in this document are for representation only.
14
If you received an Installation/Quick Start kit with the purchase of your modem, you should use
the software provided in that kit. If not, the EMTA CD included with your modem contains the
drivers and other information you need to install your EMTA.
USB Connection
If you do not want to use the CD-ROM, follow instructions 1 through 5 to connect the EMTA to
the USB port on your computer.
Instructions must be followed in the order they appear.
1.
Connect one end of the coaxial cable to the cable connection on the wall, and the other end to
the CABLE jack on the EMTA.
2.
Connect the plug from the AC power supply into the POWER AC ADAPTER jack on the EMTA
and plug the power supply into an AC outlet.
3.
Insert the supplied EMTA CD-ROM. Wait momentarily for the CD window display.
4.
Close
all
open applications and dialog boxes, including the CD window.
Note: Some applications may interfere with your EMTA installation.
5.
Connect one end of the USB cable to the USB port located on the back of your computer.
Connect the other end of the USB cable to the USB port on the EMTA.
Note: Use only the power supply that accompanied this unit. Using other power supplies may
damage the unit.
Next, you need to install the USB driver for your operating system.
