Other Information
Chapter 5
41
Chapter 5
Chapter 5
Sound okay, picture poor
• Make sure all of the cables are fi rmly connected to the jacks.
• Try adjusting sharpness function to improve weak signals. Go to page 35 for more instructions.
Volume buttons not adjusting volume louder
• Check to make sure volume isn’t limited by the maximum volume feature. Go to page 37 for more instructions.
Picture not moving
• You have activated the Freeze feature by pressing FREEZE or OK on the remote. Press any button to “unfreeze” the picture.
Black box appears on the screen
• Closed-captioning might be on. Check
Closed Caption
in the
Setup
menu. Go to page 37 for more instructions.
Setup
Setup
Freeze not working
• The freeze feature is not available for Component video (CMP1) or DVI inputs.
Low battery warning appears on screen
• Place new batteries in remote.
HD Monitor picture keeps switching between screen formats abruptly
• Switch the
Auto format
feature to
Off
. See page 34 for more information.
Off
Off
The
The Remote Control Doesn’t Work
Remote Control Doesn’t Work
• Something might be between the remote and the remote sensor on the device. Make sure there is a clear path.
• Maybe the remote isn’t aimed directly at the device (HD Monitor or VCR) that you’re trying to operate.
• Maybe remote is not in TV Mode. Press the TV button so remote will control HD Monitor.
• Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the remote. (Note, if you remove the
batteries, you may have to reprogram the remote to operate other devices.)
• You might need to drain the remote’s microprocessor: remove batteries and press the number 1 button for at least 60 seconds.
Release the 1 button, replace the batteries, and (if necessary) program the remote again.
Problems with
Problems with V-Chip/Parental Controls
V-Chip/Parental Controls
The rating limits don’t work
• You must lock the settings. Go to the
MAIN MENU
(press MENU on your remote), select
MAIN MENU
MAIN MENU
Parental Control
, select
Lock Parental
Controls
.
I don’t remember my password and I want to unlock the HD Monitor
• If you forget your password, press MENU, then select
Parental Control
(the password entry screen appears). Simultaneously press
and hold CH+ and VOL+ on the HD Monitor’s front panel for 8 seconds. The Parental control menu appears on the screen, and you
can re-enter a password via
Lock Parental Controls
.
The V-Chip won’t let me watch a program even though it’s not rated as violent.
• Maybe the movie was given an NR (Not Rated) status. After you block movie ratings, you must set
NR
to
NR
NR
View
separately in order to
View
View
view movies with an NR rating.
