Connections & Setup
Chapter 1
15
Using the Neck Strap and Lens Cover Holder
The camera’s neck strap is designed to let you carry the camera from your neck and –
when ready– bring the camera to shooting position in one quick movement.
1.
Before attaching the neck strap, thread the lens cover holder eyelets through one of
the loose ends of the strap. You may want to thread the loose end of the strap
through twice on one of the eyelets of the cover holder to keep it from moving.
Once the lens cover holder is in place, you can snap the lens cover on it to avoid
losing it.
2.
While holding one end of the neck strap by the metal clasp, pry open the clasp and
rotate it around the strap eyelet on the camera much like you would a key chain.
When finished, the clasp should be completely secure and moveable inside the
eyelet.
3.
Repeat the procedure to attach the other end of the strap to the eyelet on the other
side of the camera. Make sure the strap is not twisted.
Caution
: Make sure the neck strap is firmly attached before using it to carry the
camera.
Lens cover
Lens cover holder
Eyelet
A
F
Z
o
o
m
5.4
-16.2mm
1:2
.8-4
.4
Strap eyelets
