![RCA CDRW120 Скачать руководство пользователя страница 5](http://html.mh-extra.com/html/rca/cdrw120/cdrw120_user-manual_335066005.webp)
Chapter 1 : Setup & Connections
Chapter 1
3
Things to Consider Before Connecting Components
Protect Components From Power Surges
•
Connect all components before plugging any power cords into the wall outlet.
•
Always turn off the TV and other components before you connect or disconnect any
cables.
Position Cables to Avoid Audio Hum or Interference
•
Insert all cable plugs firmly into their jacks.
•
Place any Audio/Video (A/V) cables to the side(s) of the TV’s back panel instead of
straight down the back after connecting components.
•
Try not to coil any twin-lead cables and keep them away from all A/V cables as
much as possible.
•
Make sure all antennas and cables are properly grounded. Refer to the
Safety Tips
sheet packed with your unit for detailed information.
Protect Components From Overheating
•
Never block ventilation slots in any component. Arrange the components so that air
can circulate freely.
•
Do not stack components.
•
Allow adequate ventilation when placing components in a stand.
•
Place an amplifier or satellite receiver on the top shelf of a stand so heated air rising
from it will not flow around other components.
15920520.01 Connections
9/24/02, 3:54 PM
3