RCA CC6254, Руководство пользователя

Страница: 82 / 104

Other Information
80 Chapter 6
Tapes
• A power supply must be attached to load or eject a tape.
• When loading a tape, it takes a few seconds for the cassette tape holder open. Never
apply force to the holder or door cover as this might result in damage to the
camcorder and void the warranty.
• If the cassette tape holder does not open after a few seconds, close the holder door
and try again. If it still does not open, turn the camcorder off, then on again.
• If the tape does not load properly, open the cassette tape holder door and fully
remove the unit. Wait a few minutes and reinsert it.
• When the camcorder is suddenly moved from a cold environment to a warm
environment, wait a short time before opening the cassette tape holder door.
• Closing the cassette tape holder door before the holder comes out may damage the
camcorder.
• Even when the camcorder is turned off, a tape can still be loaded or unloaded. After
the cassette tape holder is closed with the camcorder switched off, though, it may
not recede.
Turn the power on before loading or unloading tapes .
• When recording, once the cassette tape holder door is open, a blank portion will be
recorded on the tape or a previously recorded scene will be taped over regardless of
whether the tape holder came out or not.