7
Power
1. Connect the Power Adapter to the
Amplifier by inserting the plug into
the “DC Input” on the back of the unit.
2. Plug the Power Adapter into a 110/120
Volt, 60 Hz. Outlet.
3. Turn the Antenna ON by pressing the POWER button on the Amplifier
or by aiming the remote at the Amplifier and pressing the POWER
button. A red indicator light on the Amplifier will show power is ON.
12vDC
500mA
IN
(Antenna)
OUT
(To TV)
Insert 2 “AAA” batteries in the Remote Control.
Turn on Amplifier using either the POWER button
on the Remote Control or the Amplifier.
Tune the antenna by using the arrow keys on the
Remote or Amplifier. Toggle up or down through the
tuning positions until you get the best picture for the channel you are
watching. A red indicator light will show which of the five tuning positions
is selected.
If you have an RCA Universal Remote Control, the Amplifier can be operat-
ed by using VCR code
020
. If the remote has an AUX key, the code can be
programmed under that key by following the instructions that came with
the remote control. The following VCR keys can be used to operate the
antenna as shown in the following chart:
U. Remote
Operates
Key
Amplifier
STOP
Power ON/OFF
F.FORWARD
Channel Up (CHAN UP)
REWIND
Channel Down (CHAN DN)
2-4 5-6
7-9 10-1
3 UHF
Power
Channel
Down
Channel
Up
Channel
Up
Power
Channel
Down
Remote Control
Amplifier
Using an RCA Universal Remote Control
Tuning and Using the Antenna
ANT4500X_Manual 6/10/99 12:45 PM Page 7