Copyright © 2015 Discount Two-Way Radio Corporation - North American Distributor
APR100 Bussines Two-Way Radios Instruction Manual
12
Attaching the Antenna
1. Insert the antenna into the big screw
thread hole on top of the main unit.
2. Turn the antenna clockwise until it is
screwed down as shown in Figure 5 below.
Removing the Antenna
To remove the antenna, turn it
counterclockwise as shown in Figure 5
below.
Attaching/Removing the Belt Clip
1. Using a small screwdriver, remove the
screws from the back of the radio’s chassis.
2. Align the belt clip’s screw holes to the
radio’s chassis. Turn the screw clockwise
into the belt clip’s screw holes. See Figure
6 below.
3. To remove the belt clip, turn the screwdriver
counter-clockwise to loosen the screw. See
Figure 6 below.
Antenna
Figure 6
Figure 5
Belt Clip