10
Playing the Tape
2. Press slightly the cassette player door to open.
3. Insert tape and close the door.
5. Start playback.
6. Pause playback. Press again to
resume playback. (PAUSE & PLAY
are separate keys on remote con-
trol)
7. Wind tape forward or back-
ward. Press
STOP
to end wind-
ing.
8. Stop playback.
STOP
STOP
PLAY/PAUSE
PLAY/PAUSE
PLAY
PAUSE
PLAY
F.FWD
TRACK FWD
TRACK REV
REWIND
1. Select
TAPE
mode.
Recording
2. Select recording source (CD,
TUNER, TAPE or AUX)
3. Start recording.
1. Insert tape into cassette player deck 1.
4. Playback will be started automatically for CD and
tape recording. For recording from auxillary input,
you have to start playback on the auxillary unit (e.g.
MD player).
5. Pause recording. Press again to
resume recording.
6. Stop recording.
STOP
STOP
PLAY/PAUSE
PAUSE
RECORD
RECORD
Tips:
• read “More Information” for care and
maintenance on casette player.
•
RECORD icon shows on display during recording.
•
RECORD button cannot be activated without
inserting cassette tape.
• Make sure the tab on the side of the tape is not
removed for recording.
• Press S E T to reset tape counter to 0000.
Cassette Player
EN
4. Select between deck 1 & 2.
DECK 1/2
TAPE
SOURCE
SOURCE
Continuous Playback
Rotate until you see “
C
” appears on dis-
play to activate continuous playback
either from deck 1 to 2 / 2 to 1 (once only,
and not from 1 to 2 and then 1 again).
-
M
U
LT
I J O
G S TA
T I
O
N
+
RS2523 US ENG 4/24/00 3:41 PM Page 14
