
FIGURE 5
/
Connect a 3/4" piece of BARE WIRE from XV1-1 (C) to XV1-3 (S1).
�.
( ) CUT a 5" piece of BLACK COAXIAL CABLE. STRIP off 3/4" of the outer insulation from
both ends so that the braided shield is visible.
DO
NOT CUT the braid. Using a sharp pointed
tool, UNRAVEL the exposed braids covering the INNER CONDUCTORS. Twist the strands to
gether, then remove 1/4" of insulation from the CONDUCTORS. CUT OFF
the
SHIELD from one end and CONNECT the INNER CONDUCTOR of this end to
ROUTE
the other end to the front of the CHASSIS as shown. It will be connected later.
l.-·
l,3. ( ) Connect a 2-1/2" piece of VIOLET WIRE from XY1-� (S1) to TB4-1 (C).
L;t'.
( ) Connect a 8" piece of THICK WHITE WIRE to XV2-1 (C). ROUTE the other end through
hole "A" to the top of the chassis. It will be connected later.
( ) Cut a 6" piece of BLACK COAXIAL CABLE as described previously. CUT OFF the
BRAIDED SHIELD from one end and CONNECT the INNER CONDUCTOR of this end to XV2-2
(C). ROUTE the other end through the switch cutout to the front of the CHASSIS as shown. It
will be connected later.
I.E(
( ) Connect a 3/4" piece of BARE WIRE from XV2-3 (C) to XV2-8 (C).
V7. ( ) Connect a 5-1/2" piece of BROWN WIRE from XV2-g (C) through XV2-,4 (S1)
to
XV5-5C.
l/8. ( ) Connect a 3-1/2" piece of BROWN WIRE from XV2-5 (S3) to XV4-12 (C).
l--·g.
( ) Connect a 2" piece of VIOLET WIRE from XV2-7 (�1) to TB4-l (C).
l).O. ( ) Connect a 4" piece of YELLOW WIRE from XV2-9 (C) to XV4-1 (S2).
v!1· ( ) Connect a 3/4" piece of BARE WIRE from XV4-3 (S1) to XV4-6 (C).
li2. ( ) Connect a 1/2" piece of BARE WIRE from XV4-4 (S1) to lug "X" (S1) on XV4.
U3.
( ) Connect
n
2-1/2" piece of GREEN WIRE from XV4-5
(r/r)
to TB6-1 (C).
u4.
( ) Connect a 2-1/2" piece of GRAY WIRE from XV4-9
(dr)
to TB6-2 (C).
J/
15. ( ) CUT an 8-1/2" piece of BLACK SHIELDED CABLE as described previously. CUT off the
SHIELD from one end and CONNECT the INNER CONDUCTOR of this end to XV4-11
ROUTE the other end along the chassis as shown. It will be connected later.
[
16. ( ) Connect a 3" piece of BROWN WIRE from XV4-12 (S
� �
XV6-3 (s1
)'.
\.
17. ( ) Connect a 2-1/2" piece of VIOLET WIRE from XV6-7 (81) to TB7 -4 (C).
vf8. ( ) Twist a 13" piece of THICK BROWN WIRE and a 13" piece of HEAVY YELLOW WIRE to
gether.
YELLOW WIRE to XV5-9 (C). Connect the BROWN WIRE through XV5-5
(C), to XV5-4
ROUTE the other ends of the twisted pair through HOLE "C". It will be
connected later.
lJ.9. ( ) Connect a 3" piece of ORANGE WIRE from TB5-1 (C) to TB6-4 (C).
10
Содержание 54-45
