2
NOTE: Toll Saver can save you the cost of a call when you access your message from another
phone.
- If you have new messages, the unit answers after the 3rd ring.
- If you have no new messages, the unit answers after the 5th ring.
- You can hang up after the 3rd or 4th ring and save the pay telephone
or long distance charge.
Message Length
This sets the maximum recording time for the caller to leave a message when the answer-
ing function is on.
1. Press the MENU button while in standby mode.
2. Use the VOL (+ or -) buttons to scroll up or down to
ANSWERING SYSTEM
.
3. Press the SEL/SAVE button.
4. Use the VOL (+ or -) buttons to scroll up or down to
MESSAGE LENGTH
.
5. Press the SEL/SAVE button.
6. Use the VOL (+ or -) buttons to scroll up or down to
No Limit, 1 minute, 2 minutes,
or
Greeting Only
. The default is No Limit.
7. Press the SEL/SAVE button to save.
NOTE: If you select Greeting Only, once the call is picked up by answering system, it will
announce “Sorry, no one is available to answer the call. Please call again.” and then
drop the call.
Call Screening
If activated, it allows you to listen to incoming messages as they are recorded.
1. Press the MENU button while in standby mode.
2. Use the VOL (+ or -) buttons to scroll up or down to
ANSWERING SYSTEM
.
3. Press the SEL/SAVE button.
4. Use the VOL (+ or -) buttons to scroll up or down to
CALL SCREENING
.
5. Press the SEL/SAVE button.
6. Use the VOL (+ or -) buttons to scroll up or down to choose
ON
or
OFF
.
The default is ON.
7. Press the SEL/SAVE button to save.
Programming the Answering System