23
Operation
Making Calls with the Optional Headset
1. Connect the headset plug to the HEADSET jack on the side of the base.
2. Adjust the headset to rest comfortably on top of your head and over your ear.
3. Move the microphone to approximately 2 to 3 inches from your mouth.
4. Press the HEADSET button and the phone automatically selects the priority line. If the priority line is occupied, it selects an open line.
5. Wait for a dial tone, then dial a phone number.
6. Press HEADSET when finished.
CAUTION: Use only the ATLINKS USA, Inc. 5-2425 headset that is compatible with this unit.
NOTE: If the headset is not connected, an error tone is heard when the HEADSET button is pressed.
Pre-dialing
1. With the phone idle and the handset on the cradle, manually enter the telephone number. The telephone number shows in the display.
2. Press the DIAL or SPEAKER button, or lift the handset to take a line, and the telephone number is automatically dialed.
NOTE: The unit displays "< or > to adjust format" below the telephone number you just entered. If desired, you may press the < REVIEW > button, within 5 seconds, to
change the format. When finished, press the DIAL button to immediately dial or wait for the phone to dial automatically.
Answering Calls
If you receive a call on the priority line,
1. Pick up the handset, OR
2. Press the SPEAKER button (speakerphone mode), OR