From the Initial Setup Menu:
1. Press the
caller ID-volume
(
or
) button to scroll to the
AUTO TALK
sub-menu.
2. Press
mute/menu OK
button to enter the menu. The screen displays >
NO
YES.
3. Use the
caller ID-volume
(
or
) button to scroll to your selection. NO is
the default setting.
4
. Press the
mute/menu OK
button to confirm.
Registration
Your packaged handset(s) are pre-registered and ready to use. It is not
recommended that a handset be registered again unless absolutely
necessary.
From the Initial Setup Menu:
1. Press the
caller ID-volume
(
or
) button to scroll to the
REGISTRATION
sub-menu.
2. Press the
mute/menu OK
button to enter the menu. The screen displays
YES NO. The default setting is
NO
.
3. Use the
caller ID-volume
(
or
) button to scroll to
YES
or
NO
.
4
. If you select
YES
, press t h e
mute/menu OK
button. The screen displays
HOLD BASE FIND FOR 5 SECONDS, THEN PRESS MENU OK KEY.
(Your
handset should be held near the base during registration process.)
5. Press and hold the
find
button on the base unit , the charge/in use indicator
flashes. Press the handset
mute/menu OK
button. The screen displays
REGISTERING
, and then the screen displays
REGISTERED
. You may
now rename your handset. (Refer to Step of Handset Name Section)
NOTE: If you are re-registering the handset through the handset
menu; to rename your handset you must go to the Handset Name
Section and start from the beginning step.
De-Registration
De-registration cancels registration. During the de-registration process, keep
the handset near the base.
From the Initial Setup Menu:
1. P r e s s t h e
c a l l e r I D - v o l u m e
(
o r
) b u t t o n t o s c r o l l t o t h e
DEREGISTRATION
sub-menu.
2. Press the
mute/menu OK
button to enter the menu. The screen displays
YES
u
NO
. The default setting is
NO
.
3. Use the
caller ID-volume
(
or
) button to scroll to
YES
or
NO
.
