31
»» All old messages are permanently deleted.
Note
•• You can delete the read messages only. No deleted messages can be
recovered.
Call screening
You can hear the caller while he is leaving a message. Press
to pick up
the call.
From the base
Press + / - to adjust the speaker v o l u m e during call screening. The lowest
volume level turns off the call screening.
Set the ring delay
You can set the number of times the phone rings before the answering
machine picks up the call.
1 Press MENU.
2 Select [ANSWER MACHINE] >[SETTINGS] > [RING DELAY], then press [OK] to
confirm.
3 Select a new setting, then press [OK] to confirm.
»» The setting is saved.
Note
• Ensure that the answering machine is switched on before this feature can
be applied.
Tip
When you access the answering machine remotely, you are recommended to
set the ring delay to [ECONOMY] mode. This is a cost effective way to manage
your messages.
When there are new messages, the answering machine picks up the call after
3 rings; when there are no messages; it picks up the call after 5
rings.
Remote access
The unit answers after 10 rings if it is turned off. To access the answering
system, enter your 4-digit PIN CODE.
You can operate your answering machine when you are away from home.
Simply make a call to your phone with a touch tone phone and enter your
4-digit PIN code.
Note
• The remote access PIN code is the same as your system PIN. The preset PIN
is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the answering machine.
