System Options and Preferences
68
Changing the Signal Source
The Signal Source menu allows you to choose the source from which you would like
the signal to come: Antenna A, Antenna B, or DIRECTV or Video Inputs. The same can
be accomplished using the ANTENNA, DIRECTV, and INPUT buttons on your remote
control. If you misplace your remote control, use the front panel buttons to access
this menu and change the signal source.
To access the Signal Source menu:
1.
Press MENU on the remote control to access the main menu.
2.
Select
System Options
from the main menu.
3.
Select
Signal Source
from the next menu.
Select the appropriate signal source.
4.
Use the arrows and OK to select which source from which you would like to
receive a signal.
Changing the Signal Type
The Signal Type menu lets you choose whether you are receiving a signal from cable
TV or an off-air antenna. When you run Channel Search (see “Channel Search” in this
section for details), the TV automatically detects your signal and you don’t have to
specify it here. However, if you decide to change the source, you will need to use the
Signal Type menu. Note that when your signal source is coming from DIRECTV, this
menu will not be available.
Select whether you are receiving signals from an off-air antenna or
cable.
Note that viewing a VCR
while in AIR mode may
result in poor picture
performance. If you have
a VCR connected to
Antenna A or Antenna B,
set the Signal Type to
Cable
for that Antenna.
