Speakerphone
1. When the phone rings, press the speaker button to answer a call.
2. When finished, press the speaker button to hang up.
You may switch between the speakerphone and the handset during the dialing
process or anytime during a conversation.
Speakerphone to Handset
-Pick up
the handset to disable the speakerphone. The speakerphone indicator turns
off.
Handset to Speakerphone -
Press the speaker button, and then hang up
the handset. The speakerphone indicator turns on and the handset is disabled.
Volume
You can control the volume of both the handset receiver and the
speakerphone.
While using the handset or speakerphone, you may adjust the volume to
the desired listening level by using the volume (
or
) buttons. Handset
volume has 4 levels for adjustment and Speaker volume has 8 levels.
Amplified Audio
You may press the amplify button to temporarily boost the
volume of the handset receiver during a call. To return to normal
levels, press the button again. Volume levels will also return
to normal when handset is replaced on base after call.
The
“AMPLIFY” button controls the increased volume
level and audio tone of the handset.
1. Press the volume (
or
) button to minimum, pick up the handset and press
the amplify button to turn on the incoming voice amplifier. The indicator
around the button illuminates.
2. Adjust the volume by pressing the volume (
or
) button. When the amplify
button is pressed , an extra level of amplified volume is added providing up to
40dB of gain and level control. In standard use, the amplifier
turns off whenever you hang up the telephone. If you want the amplifier to
turn on whenever you pick up the handset , slide the Amplify Override switch
located at the back of the unit to ON.
NOTE: AMPLIFY feature is possible in both Handset and Speaker
Mode.