RC4WD Z-RTR0035, Руководство пользователя

Страница: 8 / 18

3C Transmitter / Radio
Step 4. Binding the Transmitter and Receiver
Step 5. Fail Safe Function Settings
Step 6. Transmitter Adjustments
1. Turn on the
receiver power. Press
the SW switch. The
receiver’s LED should
start flashing.
2. Turn on the
transmitter.
3. When the LED on
the receiver becomes
solid, the binding
process is completed.
LED
1. Set the TH, ST switches to the norm position.
2. Turn on the transmitter and receiver.
3. Press the F/S SET button, the LED on the
receiver should start flashing rapidly.
4. Put the throttle trigger in the break position,
press the F/S SET button. The LED should
become solid.
5. For Electric Model, put the throttle trigger in
the stop position when you are adjusting the
setting.
WARNING: 1) Keep the transmitter and receiver
40cm apart when operating.
2) Do not operate the radio system when the
battery power is low.
A. Throttle Trigger
Forward/
Speed Up
Brake/
Speed Down
Left
Right
Neutral
B. Steering Wheel
1. Push the trigger forward to slow down
brake.
2. Pull the trigger backward to accelerate.
Turn the steering wheel to
the left or right to let the vehicle
turn left or right.
Neutral
vii
Trail Finder 2 RTR w/Chevrolet Blazer Body Set
(Limited Edition)