2
3
RC4 LumenDimPix
1. DMX Data Indicator
2. Function and COP
3
Indicator
3. Function Button
4. SetA, SetB Buttons
5. RF Connect Indicator for Transmitter Linking
6. RF Connect (Link) Button
7. I2C Data Port (for Advanced Applications)
8. Power Input Connector
9. Pixel Control Port A
1
10. Pixel Control Port B
1
11. DMX/RDM Data In/Out
12. Removable Phoenix Connectors for Power and Pixels
2
1
Pixel Control Ports provide 4 connections:
+
Positive power to pixels
D
Data line for pixel control
C
Clock line for pixel control (not used with 3-wire pixel products)
-
Negative (ground) power to pixels
For pixel loads drawing more than 6A, pixel power should connect DIRECTLY
to the power supply or battery, NOT through the LumenDimPix. A common
ground (-) is always required between the LumenDimPix and the pixels.
2
One set of connectors is provided with each new LumenDimPix.
Additional sets of connectors available separately from RC4 WIreless.
3
COP means “Computer Operating Properly.” This indicator always shows a blink
pattern, proving that internal firmware is running. Different patterns indicate various
modes and advanced settings.
11
1
2
3
5
4
6
7
8
2
3
9
RC4Wireless
Lum
enDimP
ix
10
+
-
C
D
+
-
C
D
+
-
12
