11
11
Connecting Your Lamps, LEDs, Motors and More*
To really use your LumenDim6, you must connect a lamp, LED, motor, or other
load to each dimmer. When you’re connecting anything to your LumenDim6, be
sure that the LumenDim6 is powered down. Connect everything first, then turn
on power.
The
red
output connections are positive (
+
), the
grey
connections are negative (-).
Dimming occurs on the negative side. The positive connections are all
connected together inside the LumenDim6.
* DimC , D, E, and F on the LumenDim6 can control a variety of devices including solenoids, relays, servo
motors, and much more. DimA and B are intended for LED dimming only.
Power Input: 6 - 35VDC
Do not exceed voltage
rating for connected loads.
Common Positive
(
+
)
