rc3Dprint Micro Velocity, Руководство пользователя

Страница: 10 / 22

A S S E M B LY
1. T H R O U G H O U T T H E B U I L D , A D H E S I O N S S H O U L D B E
C A R E F U L LY R E M O V E D A N D F A C E S T O B E G L U E D
T O G E T H E R S H O U L D B E S A N D E D F I R S T T O E N S U R E
G O O D C O N T A C T . T H I S I S
C R I T I C A L . T I M E T A K E N
H E R E W I L L E N S U R E S Y O U R A I R C R A F T I S S T R O N G .
F U S E L A G E
-
Glue to the two fuselage pieces together
W I N G S
-
Cut your carbon tube to size, you can then build your wing around this. It doesn’t have to
be glued in place however, this is so that it is easier to remove it incase you have a crash
and want to use it again. Because of blobs and expansion you will need to carefully clear
out the ends of the holes for the carbon rod in the wing pieces.
-
Starting from the root build the wings sections up using the carbon tube to help with
alignment. You want to be able to keep the tube free so that you can position it for the
end pieces. Don’t worry about the ailerons yet.
-
Glue both parts of the vertical stabs together and clean out the hole for the spar. Tiy can
then add this on the the end of the wing with the carbon in place.
-
Clean up the holes for the TPU hinges in both the aileron and wings.
-
The carbon spar can now slide into the fuselage and the wings glued on. TAKE CARE TO
ALIGN THE WING CORRECTLY.